This product is currently out of stock. We don't know if and when it might become available again. Please do not order this product until this notice is removed. If you do order, we will have to cancel your order.

SULOFRI-SHEET-3M-10x12 is a sheet of the exact same material we use for our SULOFRI super-low friction soles, for dancing outdoors on concrete and asphalt. The sheet is of Size 10 in x 12 in (254 mm x 305 mm) with a thickness of 0.03". SULOFRI-SHEET-3M-10x12 can be cut with household scissors or utility knives. We cut our SULOFRI soles products from these exact same sheets and we can squeeze four complete sets of SULOFRI soles from one SULOFRI-SHEET-3M-10x12.

SULOFRI-SHEET-3M comes with industrial-strength adhesive backing. After cutting the sheet, just peel of the protective liner of your cut piece and stick the piece to your shoe sole. The adhesive backing will stick securely to leather or suede-soled shoes and to most natural rubber-soled shoes. The adhesive will stick less securely to shoe soles with an aggressive or knobby profile, that is, soles that don't offer much surface area to stick to.

Dancing with SULOFRI soles

SULOFRI soles allow dancers to pivot with ease on extremely high-friction dance floors such as concrete and asphalt. SULOFRI soles offer much less resistance to pivoting and linear sliding than our standard low-friction products. Out of more than 20 materials we tested, SULOFRI is the only material that works real well on concrete and asphalt. Indeed, on those difficult surfaces pivoting is just as easy as it is with suede soles on well-maintained wood floors. However, the super-low-friction material is soft and wears out very quickly on those abrasive surfaces. For example, active dancers can wear out their super-low-friction components in as little as 4-6 hours of dancing on rough concrete (the actual wear rate depends strongly on surface, dance style, and the dancer's weight).

One sheet of SULOFRI ultra-low friction material with adhesive backing.

• Nominal dimensions*: 10 in x 12 in (254 mm x 305 mm)
  
• Thickness: approx 0.03"
• Instructions
  

Available Discounts

• Click on the View Quantity Discounts button near the top right corner of this screen to see the price for quantities of this product greater than one.
• Click here or on the Discounts button on the left to see details and restrictions on our discounts.

Shipping

See details on shipping here or click on "SHIPPING" on the left.

For all other business information, please visit our store's home page.

Warnings:

1. SULOFRI is intended solely for dancing outdoors, on concrete and asphalt. Never walk or dance with SULOFRI soles on any other surface, as it is extremely slippery. Even on concrete and asphalt, SULOFRI is so slippery that you should avoid walking as much as possible.

2. SULOFRI material has ideal friction properties for dancing on concrete and asphalt. Unfortunately, it is expensive and it wears down very quickly. This shouldn't be too surprising, though: concrete and asphalt are very abrasive surfaces, almost like sand paper. One might ask why rubber soles don't wear down as quickly. It's because they grip instead of slide. Dancers, however, like to pivot and slide, and if one was able to do so with rubber soles, then those would wear down just as quickly.

If you were sent to this page directly from a search engine, we recommend that you inform yourself about the unique advantages of Soles2dance on our Home Page and consult our Product Selector, to find out which Soles2dance products will best match the floors you want to dance on.

Home page - unique advantages of Soles2dance

Product Selector - which Soles2dance product to chose